Astro polished silver lava lamp GU10 bulbs – 3 Pack

22.00

30% Off when you spend 75€ or more
This pack of three 40W capsule bulbs comes with a GU10 (two-prong) adaptor. New Mathmos polished silver Astros are all supplied with GU10 fittings. If you are buying replacement bulbs for older Astros please check your lamp to see which fitting you have. These three 40W capsule bulbs are a substitute for 35W reflector bulbs for Astros with a polished silver finish. These robust capsule bulbs are developed specially for use in Mathmos lava lamps to create the right amount of heat and light for Astro polished silver lava lamps. NB. These bulbs are suitable for Astros with a polished silver finish only not other colours/finishes.
Astro silver lava lamp bulbs GU10 - 3 Pack

Free Delivery with no customs charges within 2 – 10 days
More info here

No quibble returns
More info here

Multiple Secure Payment Methods
We accept these following payment types:
payment_types

More info here

Specifications

Light: 40W G9 230 – 240V Capsule bulb
Notice: This bulb is primarily used as a heat source. For Mathmos lava lamps only. Not for household room illumination. Suitable for operation at ambient temperature ≥ 300°C. For use in high-temperature applications.
Lifespan1500h
Colour temp2700K
Lumens413lm
kWh/1000h40
CRI99
Height42mm
Diameter14mm
Energy Label G
See datasheet (pdf) Bulb Care and handling IMPORTANT! FITTING MATHMOS HALOGEN CAPSULE BULBS
  1. Handle the bulb with great care; halogen bulbs are extremely delicate.
  2. Allow the bulb to warm to room temperature.
  3. Make sure your lava lamp is in the correct location.
  4. Carefully push the two prongs of the adapter down into the socket and turn it a quarter-turn clockwise until it stops rotating.
  5. Use a tissue to hold the bulb; deposits on our fingers can damage the bulb. Carefully push the capsule bulb into the adapter slot until it fits into place firmly.
  6. Gently place the bottle on the base.
  7. Turn the lamp on using the inline switch.
Important
  1. Never touch the bulb or the lamp when it is on.
  2. Allow the light to cool for one hour before touching the bulb or lamp.
  3. Do not run your lava lamp for more than 6 hours at any one time.
  4. Always leave the bottle sitting on the base when you turn it on.

Browse other categories