Neo lava lamp for children & all ages: Orange
|Height:||42 cm (16.53 in)|
|Width:||14 cm (5.51 in)|
|Bottles:||Glass, Made in Britain|
|Metal:||Die-casting with zinc-alloy material, chrome plated|
|Lava:||Mathmos special formula, Poole|
|Light:||20W halogen capsule bulb, GY6.35 12V|
How do I fit my Neo halogen bulb?
Once your product has completely cooled, use the Allen key provided to unscrew and remove the back screw (keep these components safe). Holding the bottle and arm piece carefully, lift and remove the bottle and arm piece from the base. Carefully take the arm piece off the bottle. When installing the bulb, please only fit the correct type, as stated in the label on the base. You can install this by gently pushing them into the holder socket. Following a successful bulb change, please follow the instructions given previously in reverse to reassemble your lamp.
How long should it take for my lava lamp to warm up?
Most lava lamps should start working within one hour to an hour and a half after they have been switched on. First, they will form stalagmite shapes before the liquid lava formations. Please note that new bottles may take longer to heat up (up to three hours), but the time taken is expected to decrease after several uses.
Are Mathmos lava lamps suitable for children?
The only suitable lava lamps for children are the Mathmos Neo table range. The Neo lava lamp was developed with children in mind, so as well as looking stylish, it is also shatterproof, has fixture points, does not get too hot, and is screwed together as a secure unit. The lamp has also passed stringent safety checks required to be classified as child-safe, something no other lava lamp in the UK has a classification for. We recommend all other lava lamps be placed well out of reach of children under 14 years old.
What makes Neo qualify for a certificate for all ages, unlike other lava lamps?
The product must adhere to a stringent criterion to achieve this. For example, the bulb should not be accessible without a tool, it must be low voltage (not mains voltage), it must be very stable, it must have a shatterproof coating on the glass, the bottle must be fixed to the base, and it must not be too hot.
Can I use a Neo bottle in my Telstar or Astro Baby lava lamps?
No. Neo has a unique formulation different from other bottles. This would overheat if used with other models. Contrastingly, Astro Baby and Telstar bottles will run slowly or not at all if used with the Neo.
Neo’s bottle looks a little different to the other Mathmos lava lamp bottles, why?
The bottle has a shatterproof coating to help hold the glass together should this be dropped and broken. In this worst-case scenario, additional bottles are available to be purchased here.
I have lost the screw holding my Neo together. What should I do?
Replacement screws and Allen keys can be purchased for the Neo lava lamp here.
Can I easily change my Neo bottle when needed?
Once your product has completely cooled, use the Allen key provided to unscrew and remove the back screw (keep these components safe). Holding the bottle and arm piece carefully, lift and remove the bottle and arm piece from the base. Carefully take the arm piece off the bottle. Reverse this process to install the new bottle. Replacement bottles for the Neo lamp can be purchased here.
Why is my Neo lava lamp not lighting up?
here. Alternatively, please check the integrity of your power supply (from the plug to the lamp). Replacement power supplies can be purchased here.
Why is there a small gap between the base and the bottle?
Some lamps have a shadow gap between the base and the bottle; this is normal.
I am having trouble fitting my Neo together.
It is important to install the cap and rear arm element on top of the bottle before you position these on the base. Please see the 'Instructions' tab for detailed assembly guidelines on the relevant product page.
There is a little light bleed from the joints at the back of Neo, is this normal?
Yes, this is normal.
The screw fixing my Neo together sticks out a little, is this normal?
Yes. They do vary a little, and this can be normal.
Is it possible to connect my Neo Wall lava lamp directly to the mains wiring without the supplied power supply?
Under no circumstances must the Neo Wall be installed in this way. The Neo Wall lava lamp is a low voltage (class III) product and must be connected to the included power supply to function safely and correctly.
Why does my Neo lava lamp not come on immediately?
A slight delay before the light comes on is normal with halogen bulbs. This is not considered a fault.
What are the differences in quality between a Mathmos lava lamp and others?
Mathmos have been manufacturing high-quality lava lamps in Britain since 1963 and provide a comprehensive range of spare parts. Our unique lava formulation offers a superior flow, longer life, clearer liquid, and the most vivid colours. We operate to the highest safety standards and build quality, and several independent bodies audit us.
Why can I see a metal spring/coil floating in my lava lamp bottle?
The metal spring is an essential component in any lava lamp. This should be found at the bottom of the bottle. If this becomes dislodged, please run the lava lamp for up to six hours. This process may need to be repeated.
The replacement bottle I ordered does not fit my lamp. Can I change it?
Please contact Mathmos customer services here.
Why has my lava lamp made strange stalagmite shapes?
This is how a lava lamp works. These stalagmite shapes are the early stage of the warming-up process. Please leave the lava lamp on for longer, and this will start to melt and form moving lava shapes.
Why does my lava lamp colour look different to the picture?
Mathmos lava lamp bottles are made by hand, so there may be small variations in the colour. The appearance of colours can vary under different lighting conditions. For reference, our photography will usually display products in a lighter environment. Read more about how lighting can affect lava lamps on our blog here.
What is Mathmos doing about the halogen bulb phase-out?
Don't worry. Whilst some halogen bulbs are being phased out for lighting purposes. Mathmos uses compliant halogen bulbs to heat and light its lava lamps. We also have alternative ways of powering our iconic lamps should there be any further changes to the regulations in the future. We are committed to ensuring that our lava lamps stay out of landfill and spares will be available on an ongoing basis.
What is the lifespan of a Mathmos bottle or bulb?
Mathmos lava lamp bottles last for approximately 2,000 hours. The life of the bulbs can vary depending on usage as halogen bulbs are very delicate. Replacement bulbs and bottles are available to purchase from our website here.
How long can I leave my lamp switched on?
Most lava lamps can be used for up to six hours at a time, except for the Candle range (maximum 4 hours) and the Saturn Giant lava lamp (maximum 12 hours).
Where is the Mathmos brand on my lava lamp?
This will vary per model. The Mathmos logo will either appear on the base, cap, or the label on the lead. In most cases, it will be etched onto the bottle.
Why does my lava lamp have specs and bubbles in the glass?
Mathmos lava lamp bottles are manufactured in one of the highest quality automated bottling factories in Great Britain. Small bubbles in the glass are a normal part of the manufacturing process and are not a fault.
Why does my lava lamp bottle leave one large bubble sitting at the top that does not move?
The lava lamp has overheated. It may have been on too long (more than 6 hours). Alternatively, the placement may be unsuitable, such as near a heater or window. Please turn off the lamp and allow it to cool. Reposition your lava lamp to a suitable placement between 20 and 24 degrees.
Can I buy Mathmos lava lamps and spares for delivery to the USA or Canada?
Not at the moment, but please sign up to our USA mailing list to be notified when you can buy from us here.
Why is my lava lamp bottle cloudy?
Lava lamps can become cloudy for two reasons; either they have been shaken or moved whilst hot, or the bottle has reached the end of its life (approximately 2,000 hours). This is often irreparable. Run the bottle a few times to see if this improves the situation. If the bottle does not clear you can purchase a replacement bottle for your lava lamp here.
Why has the liquid in my bottle gone clear?
Do you offer any colours in addition to what is shown on your website?
Mathmos has offered a huge number of lava colourways in its long history, but sadly it is not possible to keep every colour in stock. Please choose from our current range. We cannot offer a custom refill service on an ongoing basis. However, please sign up to our mailing list and social media channels as we occasionally offer limited special fills.
Can I buy new liquid for my lamp, or do you offer custom refills?
We do not offer lava lamp bottle refills. Lava lamp bottles are sealed units and should not be tampered with for safety reasons. Do not attempt to top up the liquid as this will void the warranty and could lead to overfilling and increased pressure on the glass as the liquid expands. We do not sell the liquids separately, but you can buy a new bottle and its professionally filled contents from the Mathmos website here.
Why can I see air bubbles in the lava?
Small bubbles in the lava are normal, particularly when you first receive the lamp. As you use the lamp over time, the bubbles will reduce.
Why is there wax sticking to the side of the bottle?
Why can I see a foreign object in my new lava lamp bottle?
There should be nothing in the bottle besides lava, liquid and a metal coil. Sometimes you may notice darker specs in the lava as it is flowing. As each batch is individually made, varying amounts of dye particles can sometimes be observed in the lava. These will often fade over time and are not considered a fault. Please contact our customer services here if you see anything else in your bottle.
How should I recycle my lava lamp when it reaches the end of its life? (Except Saturn)
Why not purchase replacement parts? You can find spares for most models of Mathmos lava lamps from the 1960s to the present day on our website here. If you must recycle the unit, please take your unit to your nearest household recycling centre, which specialises in recycling electrical waste.
Has the formulation of Mathmos lava lamps changed?
The formulation has improved since the 1960s making our lamps less likely to cloud in the heat or freeze in the cold. However, we have not changed the formula in many years.
Why does my lava lamp bottle not flow or make lava shapes?Check your bulb is working and is the correct wattage.Check you have positioned the lamp away from drafts, air conditioning or a window. Try the lamp in a new position in the room.Make sure the room is at least 20 degrees centigrade.The lamp will take longer to warm up the first few times; run the lamp for 4-6 hours each time.If you have an older base check the correct light source is fitted: see our bulb section for the possible bulbs here.Check there is a coil at the bottom of the bottle.
How can I clean my lava lamp?
The bottle should be cleaned with a glass cleaner and a cloth. The base and cap are either Aluminium or Zinc (depending on the lamp you own) so please use recommended products. If in doubt just use a soft cloth. Do not use abrasive cleaning products as this can irreparably damage the lamp.
My lava lamp is faulty, what can I do?
Firstly, read through these FAQs to see if your question has been answered. If not, we offer a one-year warranty on all our products and up to two years if bought directly from our websites. If your lamp is within the warranty period, please contact our customer service team. Please read our Faulty Product Returns Advice.
Can I buy a new screw cap for my lava lamp bottle?
Mathmos lava lamp bottles are sealed units and so we do not sell the screw cap separately, but you can buy a new filled Mathmos bottle here.
My lava lamp broke on the floor, how do I clean it up?
Dispose of as much of the liquid and lava that you can remove from the floor. Then use recommended cleaning methods for removing coloured water and wax specific to your floor type.
How old is my lava lamp?
There have been many small changes in the manufacture of Mathmos lava lamps over the long production period. Dating lava lamps is not something we can do for you. To begin this process, you might visit one of the specialist sites, such as www.flowoflava.com.
Do you supply replacement lamp holders for my base?
Due to electrical safety regulations, we cannot supply replacement lamp holders separately. Fully assembled base units are available from our spares section here.