Fireflow, Pod and Pod+

WARNING!! THIS IS NOT A TOY!

Position

Choose a position for your lamp on a level surface in a room with a temperature between 20 and 24°C or (69 to 75°F).

Place the lamp well away from;

  • children under 14 years to prevent breakage
  • sunlight to prevent fading
  • drafts to prevent slow operation
  • cold places to prevent freezing
  • hot places to prevent overheating
  • animals to prevent breakage
  • do not place on carpets or block the ventilation spaces beneath the lamp.

Set Up & Warm Up


pod_fireflow_candle_lava_lamp_instructions

  1. Place the round metal insert into the designated position in the base.
  2. Place the bottle on top and the metal cap on top of the bottle.
  3. Light the tea light and insert into the opening in the base.

Between 20 – 40 minutes depending on the surrounding temperature and the brand of tea light used.

TURN OFF After 4 hrs use, or before, gently blow the tea light out without touching the product as it will now be hot.

Operation

Never use for more than 4 hours at any one time as the product will become dangerously hot.

Never touch the bottle or metal parts whilst the product is in operation as they become very hot.

Always allow one hour after use to let the product cool down before touching it or the tea light.

  • Never move or shake the bottle when in use or for one hour afterwards as this will cause irreparable clouding.
  • Use only the small 4-hour tea lights as the long-lasting ones will burn for too long.
  • Please use a new tea light every time you use the product to avoid changing it whilst mid-operation.
  • Please clean the base of the bottle before use every time to clear any soot that the tea light may have deposited onto the bottle.
  • Do not leave the product unattended with small children or animals.
  • The contents of the bottle are not dangerous and can be disposed of normally.
  • Should the liquids be spilt onto the skin or come into contact with the eyes pour on cool water, if symptoms appear please visit the doctor.

Use of candles

Always read and follow the manufacturer’s instructions supplied with candles.

  1. Never leave a burning candle unattended.
  2. Burn the candle out of the reach of children and pets.
  3. Trim the wick to about 1cm (1/2”) before lighting.
  4. Do not burn the candle on or near anything that can catch fire.
  5. Always read and follow the manufacturer’s instructions supplied with candles. Remove all packaging before use.
  6. Do not place candles in a draft.
  7. Keep the wax pool clear of matches and other debris to avoid flaming If the candle overheats and flares, cover with a damp cloth.
  8. Do not use water to extinguish the flame.